Argo AES Series Bedienerhandbuch PDF herunterladen (Seite 204)

204 A-Modell - 11/12 - Ausgabe 09/11 - 2096161 - BUE-0036-10EN

Maintenance

12.9.1 Halogen ceiling lamp

Halogen bulb 12 V/10 W

Changing bulbs:

 Unscrew retaining nut (Fig. 224,3) and remove cover plate (Fig. 224,2).

 Remove halogen bulb (Fig. 224,1).

 Put in a new halogen bulb.

 Reassemble the lamp in the reverse order.

12.9.2 Surface-mounted LED light

Changing bulbs:  Contact a dealer or service centre.

X Lights can get very hot. When the light is switched on, there must always

be a safety distance of 30 cm between light and flammable objects. Fire

hazard!

X Do not replace the LEDs in lamps with standard light bulbs. Risk of fire

due to intense heat build up.

Z A new bulb should not be touched with the fingers. Use a cloth when

installing the new bulb.

Z Only use bulbs of the same type and with the correct wattage.

Z If LEDs in lights are defect, contact an authorised dealer or service centre.

Fig. 224 Halogen ceiling lamp

Fig. 225 Surface-mounted LED light

Z LED lamps have a very long life. It is not normally necessary to replace a

lamp.

1 2 ... 199 200 201 202 203 204 205 206 207 208 209 ... 261 262

Keine Kommentare

Argo AES Series Bedienerhandbuch Seite 204